| Type of machine： | 200 Series Wide Belt Sander |
|---|---|
| Application： | Finishing and coated face polishing for various narrow panels |
| Features： | "Functional design for troublefree operation and maintenance." Sanding head in ideal combination with contact drum and polishing platen. You can use the both or either one, when needed. Contact drum with vertical micro-adjustment easily by eccentric cam mechanism according to your require-ments for sanding removal, abrasive belt grit and such applications as thickness dimensioning, finish sanding and (optionally) coated surface polishing. Pushbutton adjustment of thickness opening with digital readout for accurate setting and quick reference. Fully closed machine frame to protect operater and machine itself for maximum safety. Model T245 for max. working width 450mm, and T265 for 650mm. |
Document Request> |
|
| Type of machine： | Model Ｔ52-2DV Three Head Top Wide Belt Sander for 3' x 6' ～ 4' x 8' plywood ( Model T64-2DV for 5' x 5' ～ 5' x 10' is available.) |
|---|---|
| Application： | Plywood thickness dimensioning and finishing |
| Features： | Versatile use extra heavy-duty sander with wide range of feed speed, 15-150m/min. by conveyor belt feed. Sanding head configuration of No.1 steel contact drum, No.2 rubber contact drum and No.3 combination head of contact drum & polishing platen. Backup tables under the sanding heads can be set to floating tables for finishing or fixed tables for heavy dimensioning by changeover of air pressure. Constant passline device (top flame lifting system) to keep the feeding height to 1.050mm regardless of material thickness. Touch control panel of multi-language display with various functions for line control, production control, monitoring, etc. |
Document Request> |
|
| Type of machine： | Knife Planer / Sander series Model T-KV |
|---|---|
| Application： | Thickness dimensioning and finishing for glue-laminated board, LVL, etc.. |
| Features： | Combination of knife head / sanding head assures you of heavy thickness dimensioning up to 3mm for hard or soft edge-glued panels and LVL. Heavy stock removal is achieved by No.1 spiral cutterhead. The panel is then finished by No.2 sanding head. Three head type is available on request. The spiral cutterhead is maintenance-free and does not require special technique due to the simple fitting of disposable tungsten-carbide four-edge turnover knives. Moreover, this keeps a low noise level even in heavy calibration. Individual knife inserts require no grinding or jointing, and each one can be turned four times before replacement. |
Document Request> |
|
